Peter Cowan/Lexi Cameron wrote:
Hello Yvon
The engine is one of Jon Lauter's: Rotary Power Marine. It is roughly an
87
4 port with Holley carb and distributer ignition.
Good morning,
Distributer ignition: is that similar to Mazda's 1985 electronic distributor
ignition (electronic distributor with two igniters attached and two separate
high tension coils)?? Yvon.
Yes, our engine blocks are built by Mazda specially for our marine applications. The distributor is similar to a 1985 unit, but with a different timing curve. The power section is most similar to a 2nd generation 4 port turbo, again with some small differences. Interestingly, since our blocks are made as current production, the end housings feature the stronger castings around the dowels.
We also still have a few four port intake flanges available for those of you building your own intake manifolds.
Jon Lauter
Rotary Power Marine Corporation
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org