As Ed Anderson demonstrated, Bill is absolutely correct. You may
recall
that Ed simultaneously ignited his fuel tank and 5 gallon fuel can
while
refueling his plane (static electricity). Adding to the fun, he
dumped
burning fuel on the top of the wing and ground below it while
stepping
away
from the conflagration. Ed kept his cool, set the burrning fuel can
down a
few steps away and dropped the fuel cap into the filler hole
extinguishing
the flame from the tank. Of course in Hollywood, there would have
been
a
huge explosion. The real world is obviously far different than the
movies.
Bill, I'm finally working on the FEA request stuff for the adapter
plate.
Sorry for the delay, its been a madhouse here lately.
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
Boy! Tracy, does that bring back memories! Yes, even with the excitement of
flames everywhere (at least it seemed like it - with flames at five
different locations), I remember consciously recalling the "Theory" that
snuffing off the oxygen source should "theoretically" put the fuel tank fire
out. I recall also concern about the temper of the aluminum if the flames on
the wing burnt too long - amazing what mundane things your mind can drag up
even in moments of near panic.
For some reason the flame coming out of my fuel tank seem to hold my
attention more than the others {:>). I also recall thinking as I hastely
picked up the fuel tank cap that "..this had better work!". I too had
Hollywood visions of huge fireball and scattered pieces of plane, hangar and
me hurling through the air. Fortunately, stuffing the fuel cap into the
flaming tank hold worked just like the "theory" ( for once {:>}) and then I
had time to stuff/stomp out the other flames.
Paper fuel filters used in large plastic fuel funnels really burn a
looonnnggg time. I don't refuel from plastic containers anymore - even if
they are approved for fuel.
Ed Anderson
Matthews
What can I say? I am speechless. Hope to see you in Florida on the 27th Ed.
You will be there won't you?
Paul Lamar
I'm impressed with your cool head when it is hitting the fan. I once
stupidly lit off about a 1/2 pint or less of fuel under my beloved 911 -
IN THE GARAGE ! ! ! ! ! ! ! Damn! I got my ever-present CO2
fire extinguisher from about 10 ft away and two short squirts and it
was out, no damage whatsoever except to my heart rate. Visions of
the Porsche gone and then the house gone danced thru my head in
the 3.5 sec it took to get the bottle and put it out. That "WHOOMP !"
is a nasty sound.
I keep a SCUBA tank sized CO2 bottle within one step when
fueling my Long EZ from my plastic fuel cans. About 5000 gallons
(no typo) of autogas thru it so far and no probs, but I bought the
big fire extinguisher because I know it can happen. In my experience
CO2 puts out a fuel fire INSTANTLY (two car "tests" in 25 yrs) and
leaves no mess. I bought a bigger one for the garage after the
Porsche incident, so I have a small and a med in the garage, and a
large in the hangar.
I highly recommend that every homebuilder (who WILL be fiddling
with a fuel system with fuel) have a LARGE CO2 bottle on hand
every time you work with fuel, refuel, etc. Note that dry chemical
extinguishers are much cheaper (and I am cheap!) but I used one
of them once on a tent fire and saw a friend use one on an engine
fire in his car. You'd damn near be even just letting it burn. The
corrosive, icky mess is incredible. CO2 is much better,
but costs more and requires a physically larger bottle for the same
fire rating. It works extremely well, tho, with no damage or cleanup.
Ya'll be careful out there ! Keep your seat belts, helmet, fire extinguisher
and gun handy. Safety equipment needs to be bought ahead of time and
in use or handy to be of benefit. ;-)
Bill
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org