I'm impressed with your cool head when it is hitting the fan. I once
stupidly lit off about a 1/2 pint or less of fuel under my beloved 911 -
IN THE GARAGE ! ! ! ! ! ! ! Damn! I got my ever-present CO2
fire extinguisher from about 10 ft away and two short squirts and it
was out, no damage whatsoever except to my heart rate. Visions of
the Porsche gone and then the house gone danced thru my head in
the 3.5 sec it took to get the bottle and put it out. That "WHOOMP !"
is a nasty sound.
I keep a SCUBA tank sized CO2 bottle within one step when
fueling my Long EZ from my plastic fuel cans. About 5000 gallons
(no typo) of autogas thru it so far and no probs, but I bought the
big fire extinguisher because I know it can happen. In my experience
CO2 puts out a fuel fire INSTANTLY (two car "tests" in 25 yrs) and
leaves no mess. I bought a bigger one for the garage after the
Porsche incident, so I have a small and a med in the garage, and a
large in the hangar.
I highly recommend that every homebuilder (who WILL be fiddling
with a fuel system with fuel) have a LARGE CO2 bottle on hand
every time you work with fuel, refuel, etc. Note that dry chemical
extinguishers are much cheaper (and I am cheap!) but I used one
of them once on a tent fire and saw a friend use one on an engine
fire in his car. You'd damn near be even just letting it burn. The
corrosive, icky mess is incredible. CO2 is much better,
but costs more and requires a physically larger bottle for the same
fire rating. It works extremely well, tho, with no damage or cleanup.
Ya'll be careful out there ! Keep your seat belts, helmet, fire
extinguisher
and gun handy. Safety equipment needs to be bought ahead of time and
in use or handy to be of benefit. ;-)
Bill
After a couple of fires it gets to be old hat. You grab the extinguisher,
put it out and figure out whet went wrong. While resuscitating my 1985 RX-7
the engine caught on fire no less than 6 times. I used to joke that I had
spent more on fire extinguishers than on parts. Eventually I just left the
coating of yellow powder on the engine as a safety precaution ;) Removing
the exhaust shield, which had been caked inside with dirt and grease, helped
too.
This was in a SCCA co-op garage, BTW, with about 17 racecars, untold gallons
of Cam-2 or other racing fuel, oil and gas dewars, etc.
Mike Harrington
And yes, I drive that car every day now :)
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org