Subject: Power to weight ratio chart
From: ACRE NL
Date: 10/9/2001, 9:21 PM


I updated this chart for an upcoming EAA Sport Av magazine
article on the Mazda rotary engine used as an aircraft engine.
Note the Mazda RX8 side exhaust port engine exceeds the power
to weight ratio of a similar HP Garret gas turbine engine.

It does this despite the fact that the fuel burn is
about 0.5 for the rotary (May be even better in the RX8.
Perhaps as low as .45) while that of the small gas turbine is
about 0.7. This is about 30% less gallons per hour for the same HP.

Paul Lamar

Paul, I was intrigued the other day when while reading Military Helicopter Design Technology by Ray Prouty, page 29:

"Modern turbine engines can be assumed to have a specific fuel consumption (sfc) of about 0.5 (227g) per hp/h at their continuous ratings."

Interesting.

Hans


Perhaps for high power engines. It is the small gas turbine engines in the 250 HP range
that have the high BSFC numbers. 

Ask anybody with a turbo prop airplane how many gallons an hour they
burn. Anybody fly a turbo prop on here?  

PW T34 is 0.7  PW300 is 0.675.  PW JFTD12A (T73P-700) is 0.7. 
The PW PT6 claims 0.6. 

Perhaps for really new and big 2000 HP turbo shaft engines they can approach .5.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org