Don Dunbar wrote:

Hi Bill,
I was not suggesting that I was using 200hp for these trips as I stated that
I was running at 3500 rpm for most of these trips.
If I use fuel consumption and torque at 3500 rpm I am over the 100 hp.
I also know that any rise in the road would have the engine loosing rpm and
with throttle wide open this would suggest much more than 25% of power.
The information I posted was purely an observation which I thought may of
been of interest.
Regards Don

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org