Subject: The piston verses the rotor.
From: ACRE NL
Date: 10/16/2001, 6:56 PM

Ed Anderson wrote:

A excellent series of Articles, Paul.

    In fact, here is a suggestion you may want to consider.  I think you
should compile them in to a publication, perhaps with a bit more drawings,
figures, etc., and perhaps Tracy could offer them as an Techncial compendium
to this "Conversion Manuel" for a nominal fee. Perhaps, solicit input from
other folks you consider having the right depth of technical
knowledge/experience in specific areas.  Perhaps Paul Yaw on intakes as an
example. Perhaps Rich with his turbo Cozy, Kent with his Nitrous, etc.

  Just a thought

Tomorrow, restrictions are lifted, so I get to fly for the first time since
August.  I made the wiring change to the harness for the EC2 that Tracy
recently announced and by gosh, those other modes do make a difference.  I
can get 150-200 rpm difference in static rpm with just messing with the
ignition timing.  But, have not had a chance to see what it would do in the
air. Hope to find out tomorrow.

See you at Tracy's on the 26th

Best Regards

Ed Anderson


Thanks Ed I'll give it some thought. In the mean time I will upload them
to the ACRE NL web site. Two are up already.

What I would like to do is get some of the million circulation magazines 
like Road & Track and Car and Driver to publish them.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org