Can you make some of these plates for us Blake?
It would be really really cool if you could pocket these patterns
out of the motor plate. I got the dimensions.
Cosmetically it would look very professional and would add a
tremendous
amount of credibility to rotary engines in airplanes. What we have
now looks a bit crude and home made. Not to mention the two or three
pounds of weight savings. I think you could get as much as $300 for
these things. I'll send you mine so you can use that as a prototype.
Also a two piece end housing like this might be a good project.
Paul Lamar
How many others would be interested in a PSRU/plate like this?
Paul Lamar
I'm interested in one. Mine is for an RV-4 and though I'm not
planning to use the wide mounts on this picture I need something like this
to mount Tracy's redrive (when he gets the 2.85 version ready).. Of course
this would be a batch operation but one with only the starter mount
sticking out would be nice.
$300? Well...that would have to look real pretty for $300 (yes,
I'm a cheapbastard).
My memory fails me, does the thickness need to stay the same for
Tracy's redrive or can it be thinner if I'm not using it for the motor
mount?
Mike
Mike McGee, RV-4 N996RV, O320-E2G, Aurora, OR
13B in gestation mode
Yes it needs to be 1/2 inch thick. The web could be as little as 1/8 inch
thick
in the bottom of the pockets. What width would you like for the motor mount
brackets?
Paul Lamar
I'm not looking at using it for the motor mount at all. That's
why I only want enough sticking out to mount the starter. I'm going to do
the sandwich with the oil pan that includes the windage tray (keeps the
aerobatic oil displacement under control). This will extend out the side
and rest on a bed mount I'm working on.
I don't have any good drawings to send yet or I would. I quickly
plagiarized one of your RV-4 mount drawings to give you an idea of what I'm
talking about. The RV-4 has a sort of tunnel that runs forward from the
spar (F-413R & L for the RV-4 guys). I am going to extend that and have it
widen out enough to let the engine rest on it. It will require some rework
of the fire wall and a work around for the gear but I think when it ties
into the forward fuse it will be a little cleaner and stiffer than trying
to work with the original mount system. It sounds complicated but as much
as I've thought about it, looked at the plans and sketched it out it really
isn't. I'm going to try and get this CADed up this week and I'll post it
up for critique.
Ya know, the more I look at this the more I think I should just
cut up a bell housing for the redrive mount.
Mike
Mike McGee, RV-4 N996RV, O320-E2G, Aurora, OR
13B in gestation mode
The more I think about it the better I like it. Easy to add a little cockpit heat.
Leaves lots of room in there for exhaust. You will need a custom pan of course.
A shallow pan with a dry sump and a separate oil tank might work well.
Looking forward to the CAD drawings.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org