SNIP ..........e

         Ideas & critiques are always welcome.  I wish I was making it to
Tracy's next weekend to catch up with the rest of you guys.  I would be
lobbying for that 2.85 redrive!  My EC-2 should be shipping soon so
hopefully I'll have this thing running on the test stand next month.

Mike

Mike McGee, RV-4 N996RV, O320-E2G, Aurora, OR

OK Tracy,
This is at least 3 or 4 of us wanting the 2.85.  Hope that is enough to keep you going.  Also, the Gyro guys would love this drive!

Mike,
Have you seen the picture of how Mike Wills modified Tracy's redrive plate to mount the starter at about the 8:00 o'clock position.  He used the lower left motor mount bolt for the lower starter bolt after welding a 'tab' onto the redrive plate for the starter itself and the upper starter bolt.  I don't have a picture on this computer, I will see if I can find one at work tomorrow.

Ken Powell
kenpowell@aristotle.net

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org