Jerry Hey wrote:

Have you considered 1-3/8 inch wiggins couplings and aluminum pipe Jerry?

Butch, you got any wiggins couplings left?

The fittings I ordered are 1.250 not 1.125.  I will look at the Wiggens
tonight.  There are fittings on the engine, on the swirl pot and on the
radiator.  There will also be two aluminum cans that will need in and out
fittings.  These are to change the direction of the plumbing at the firewall
without warping the hose in big arcs.  Total of eight fittings.   Jerry

Here is a picture of the wiggins on a Continental liquid cooled
engine in Patrick Swazey's Cessna twin.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org