"Rosine, Steve" wrote:

My Mustang 2/ 13B is nearly complete.  Engine fits with plenty of side to
side room, but height was a problem.  I built a flat intake manifold,
relocated the alternator, and cut off the water pump neck to get enough
clearance.  I was able to keep the oil filter is stock location with a small
bump on the cowl.  I have the radiators in the wings (ala Bf.109), with the
exhaust wrapped around the engine and muffler under the oil pan.

Steve ROsine

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org