Inner tube 4" of  stamped perforated tube (300mm long 1.2mm thick)  -

 filled> with very tighly packed fibreglass. The ends of this tube are sealed
 with a
 > half dome end plate 1.2 to 1.6mm thick.

Will the fiberglass packing survive the exhaust heat of a rotary???
Don

Not likely.

Sure it will survive!  For 15, maybe 20 minutes.

Hans

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org