Ian & Irene Beadle wrote:
Paul, it looks like making a 2.85 drive using the six pinion will be difficult as there does not appear to be room for the drive bolts. It certainly won't be a drop in replacement in the Ross box. Mine has done 40 hours trouble free so far.
Ian RV6A
beadles@webace.com.au
That could be. It will be easier for Tracy however as the end of his
prop shaft is splined and that should fit the six pinion planet carrier
but maybe not. I just took a look at it and the spline on Tracy's
shaft is slightly larger. It looks like the the new six pinion steel planet
carrier can be bored out and re-splined to fit Tracy's prop shaft.
What about drilling the pinion shafts and using six 1/4 inch
bolts to bolt it to the Ross prop shaft flange.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org