Perry Casson wrote:
For you TIG welding gurus:
I've got most of the parts for my Mike Wills style intake manifold
http://eaa245.dhs.org/perry/mike_wills/Mike-Wills-intak007a1.jpg fabricated
but as I'm not set up to weld aluminum I'm going to have to send it out to a
welding shop. Building a jig to get all the little parts in the right
place would be no small task. I was wondering if I tack welded the parts
together using aluminum brazing/soldering rod would the TIG welder be able
to weld over it OK? All the tubes/parts are 6061t6 if that makes a
differance.
Thanks,
Perry Casson
Contact "Bruce A. Frank" <BAFRANK@worldnet.att.net>
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org