Richard Rothrock wrote:

You might be interested in http://www.opendwg.org/.  They are interested
also in dwg,dxf compatability.

OpenDWGT Alliance is an association of CAD customers and vendors

committed

to promoting Autodesk's AutoCAD DWG drawing file format as an open,
industry-standard format for the exchange of CAD drawings. As a result,

CAD

data will finally be fully-accessible; CAD software will work better

with

existing DWG files; and developers will be able to concentrate on

building

products instead of reverse-engineering solutions.

Rick

If it works my dream come true. They have an conversion utilities?

Paul Lamar

What we have here is a failure to communicate.   If the object was to have
an interchangable DWG file, I would have exported it as a DWG file in the
first place.  Every additional file conversion is a potential source of
problems.  TurboCad will export directly to most of the popular formats.
DXF was sent because it is the 'official' file interchange format.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

OK Tracy send me the dwg file and I will try it in ACAD R11 and R12 and upload
it here so others can try it in thier CAD programs. If TurboCad can do
that it would be wonderful. We will try it both zipped and unzipped.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org