Yvon Cournoyer wrote:
Good morning,
I have modified my fuel system by adding a second in-line fuel pump in parallel with the first pump. I also added a one way valve after each pump and installed one single filter after the one way valves. This adds up to many connections in the fuel lines. After testing and flying this system I find that it works well, but takes up a lot of space.
Are the one way valves necessary with in line cylindrical type EFI fuel pumps? The pressure in my system is set at 15 psi.
By removing the one way valves I could install one filter per pump and still save space and several connections.
Yvon.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org