OK Blake here is my best guess.
Can you do this? Is there enough dimensions on the pockets?
I will ship you the 28 by 14 inch alloy plate.

This is an ACAD R12 dwg file. If you need a DXF or IGES let me know.

User cuts off what he does not need. This will adapt to almost
any rubber bushing spacing. I myself will use the 29 inch
center to center spacing for the KIS cruiser.

Do you see anything wrong Tracy? Anybody else have any comments?

Paul Lamar

Ed Anderson wrote:

Any consideration given to the resonant frequency of the .25" aluminum webs?
I presume it would to higher than any frequency the engine would put out to
worry about fatique? I would probably feel more comfortable with 3/8" webs
than 1/4", but then someone else would probably prefer 1/2" webs, etc. Just
a thought.

Ed Anderson

Real high as they only stick up 3/8ths of an inch. Maybe Monty can FEA 
model it. I also think I will cut the blank down to 27 inches wide
as that is plenty for 29 inch center to center rubber bushings.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org