Real high as they only stick up 3/8ths of an inch. Maybe Monty can FEA
model it. I also think I will cut the blank down to 27 inches wide
as that is plenty for 29 inch center to center rubber bushings.

Paul Lamar

Don't think this is a case where FEA would be needed. The frequency of those
.25 in thick 3/8 tall webs is so high that you should not have to worry. The
freeware package I have does not handle enough nodes to do a part like this
properly anyway.

Monty

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org