"Harley, Ageless Wings" wrote:

Paul...

Just for your information...Visual Cadd is still reading the dwg files
you're attaching very well.  It's not a problem, as they are easy to remove,
but the dwg of the mounting plate (CDADAP11.DWG) still has two of those
"lights" identified in far corners of the drawing.  See the attached jpg for
a tiled screen print of the two items (I added the location identifiers in
parenthesis).

Harley

Sorry I missed those. When you zoom "all" on Tracy's drawing the drawing
itself gets very small and occupies only the lower corner of the screen. 
In ACAD that indicates there are some extraneous entities way out there. 
They could be as small as a dot. Hard to find and erase sometimes. Tracy 
probably used another drawing as a template and failed to erase all the old
entities before making this drawing. I'll try to find them and upload
a clean version.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org