Subject: Rotary helicoptors. V belts
From: ACRE NL
Date: 11/19/2001, 12:40 AM


Guys, every car out there (or nearly) has multiple V-belt drives for
acc'ys.
How much trouble do you have with them?  I replace mine every 100K miles
and the mostly look just fine.  Check your own experience. They are
pretty good
items if used for the proper speeds and HP loads.   I don't see a thing
wrong with
V belt drives, assuming you understand and design for the substantial
side
loads that all belts and chain drives cause.
Bill Freeman

I have had a great deal of problems with V-Belts. Though the serpentine
belts have
not given me any trouble, even when most of the ribs had fallen off!!!

So can we make a serpentine drive with an automatic tensioner?
Blake


I think that is an even better idea. Should be lighter than an old V belt
drive.

Paul Lamar

 Interesting.  I have driven several million miles, many in old junkers and have
never had a single Vbelt failure other than a seized AC compressor once.  I've
had a couple squeal due to low tension, a few show cracks in the bad old days
when I couldn't afford to replace them every 100K miles.

What sort of failures have you experienced and on what cars?

Bill Freeman
Long EZ builder & pilot
BSME, MSME
EAA Technical Counselor

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org