Subject: rotary power to weight ratio
From: ACRE NL
Date: 11/19/2001, 11:41 AM


Paul Lamar wrote:
I think the pipe line engine had BSFC and detonation problems with that huge combustion
chamber. I could be wrong on this. Perhaps a sphere's surface area to volume ratio may get
more favorable as the size increases.


Russell Kent replied:

surface area of a sphere = 4 pi r**2
volume of a sphere = 4/3 pi r**3
surface area/volume = (4 pi r**2) / (4/3 pi r**3) = 3/r

The bigger the radius, the lower the ratio.  Question is: does "lower" equate to "more
favorable" in this case?


Paul Lamar responded:

Heat is lost through the surface area.


Paul,
Combining this thread with the one about Diesel engines, perhaps a large displacement Wankel
could be built which was a spark-assisted Diesel engine?  Since Diesels generate less waste
heat, then the heat rejection problem caused by the low surface area to volume ratio would less
of an issue, correct?

Of course this is all pie-in-the-sky engineering...

Russell Kent

The trouble with a spark assisted low compression "diesel" is; it isn't really 
a true diesel.

True diesels ignite from high heat and the high heat comes from the high
compression ratio as does the high efficiency and low heat rejection
to the coolant. A high mechanical compression ratio wankel rotary would have
a poorly shaped combustion chamber. Now if it was external compression
(a turbo charger) that could be another matter but unfortunately the high heat is
wasted in the intercooler. Now if we could only control the detonation
of a turbo rotary with out intercooler than maybe.....

Turbo compound is the simple answer.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org