Blake Mantel wrote:

snips...

Paul,
I got the Al plate in yesterday and it is sitting against the Bridgeport now. Was doing a data verification and #4 10 mm bolt hole is at 226 degrees not as 256 in the chart to the right?

snips...

I just noticed there is no hole number 4 on the chart.
That was an old starter mount hole. No need for that one at all as
I can use the starter itself to match drill those holes.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org