Subject: AOPA diesel magazine article and motor plate.
From: ACRE NL
Date: 11/21/2001, 11:20 AM


770 pounds of thrust!! 770 pounds minus 540 pounds is 230 pounds
more thrust for O-360  than the TAE 125 econo shit box turbo diesel
car engine and NOT 77 pounds less thrust claimed by Tom.
This is just one of many errors and lies in this article.
I quit the AOPA a long time ago. Mainly because of the mag.
Paul Lamar

 
Wish we had some of these to play with, even with a vermicular-graphite cast iron block. Aluminum body, runs on home heating oil (for off road use only - of course!), 4-WD, style.... opps gotta clean the keyboard now. Only problem is it not imported into the US (like most neat cars)
http://www.schwab-kolb.com/audipr44.htm

Paul,
I got the Al plate in yesterday and it is sitting against the Bridgeport now. Was doing a data verification and #4 10 mm bolt hole is at 226 degrees not as 256 in the chart to the right?

Here is a screenshot with one of the pockets tool passes visible. Do you want the lay lines like that (my favorite) or just a back and forth stepping over with a border cleanup at the end?
Blake

Tracy how about that dimension? What is the angle on bolt hole number four.

Check Tracy's back view drawing gif I sent Blake. I think you are looking at the wrong
side for the angles. You are looking at the front side from this jpg you sent.
 
Maybe I better UPS Tracy's plate to you just to be absolutely certain.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

C__WINDOWS_TEMP_nsmailTL.jpg