Blake,
This is getting strange. ACAD R11 has the same bug.

Here is my ACAD R11 test drawing. I put in a point 25 degrees 2.0488 minutes
with 7.1640 inch radius, drew a line through it and  measured it with the 
dim function. This is what I got. At least the radius came out right.

Looks like we will have to convert the angles to x & y coordinates
and plot the holes based on those dimensions if you are going to
use the drawing with a program that converts the drawing directly to 
an NC machine tool G code program.

I notice the circle shows up as an oval on the screen.
Perhaps this is related to the problem.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org