Ed Anderson wrote:

Thanks Jerry,

    Certainly, glad to see the rotary word get around to other groups of
builders.  Paul as the text of the article on his Web Page as he mentioned.
I have scanned in the actual article from the magazine with photos and all.
I don't know whether Paul would want to take up the disk space with these
pages or if that would run afoul of any copyrights, but I am attaching them
to this message. Your call, Paul. Because of the size, I'll send them in
several byte size {:>) pages.

Best Regards

Ed Anderson

Ed Anderson
Matthews, NC
RV-6A N494BW
eanderson@carolina.rr.com

Wow Ed that was a huge 2.7 meg file. The Internet will come to a screeching
halt if we sent that out to all 1000 subscribers. I cut it down and I got
it to a 100K file. Still looks pretty good would you not agree? 

Cut the rez on your scanner
to 100 pixels per inch and scan a page. If you can read it then that is fine.
If not go up to 150 pixels per inch which is about the max size file
that I can publish  for a 8.5 by 11 page. Send one page at a time to me as my 
20 gig hard drive will have no problems for years to come. After all I don't
run bloated windows here :-)>

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org