Subject: Avgas vs Mogas, was: Mazda engine conversions (ForAircraft)
From: ACRE NL
Date: 12/20/2001, 10:14 PM


I have to ask, why not use a egt and fuel flow meter/ Tells you so much more.
like your hp at any given rpm range. And by the way 100LL is death to a
rotary. You should see the inside of one. But using once in awhile changing
the spark plugs work and adjusting your egt and rpm you can easily burn the
lead out. The term 100 low lead is grossly miss leading. I've disassembled
engines (new ones) just to check this situation after just one cross country.
I come from the seventy's rotary's when a tune up was to remove the spark
plugs blast them with abrasive and go run the car hard down the Calif.
freeway and hand it back. The newer engines are more tolerant than the old
ones. But fuel flow and egt tell you so much at at glance. Never have used an
o2 sensor for the very reasons you guys are discussing. Tracy's injection is
perfect for what I'm saying. Hey I'm just asking why have an o2 on board?
Skip


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org