I have to ask, why not use a egt and fuel flow meter/ Tells you so much more.
like your hp at any given rpm range. And by the way 100LL is death to a
rotary. You should see the inside of one. But using once in awhile changing
the spark plugs work and adjusting your egt and rpm you can easily burn the
lead out. The term 100 low lead is grossly miss leading. I've disassembled
engines (new ones) just to check this situation after just one cross country.
I come from the seventy's rotary's when a tune up was to remove the spark
plugs blast them with abrasive and go run the car hard down the Calif.
freeway and hand it back. The newer engines are more tolerant than the old
ones. But fuel flow and egt tell you so much at at glance. Never have used an
o2 sensor for the very reasons you guys are discussing. Tracy's injection is
perfect for what I'm saying. Hey I'm just asking why have an o2 on board?
Skip
Skip, I'm new to all this so take my thoughts with a grain of salt. A
dealer that sells the Floscan flow rate meters said they are highly
inaccurate with fuel injected engines due to foaming or somesuch in the
return line, making it difficult for the 2nd meter to be accurate. With
that in mind, I'll be using pressure and injector pulse to calculate
fuel flow. EGT's will also be available.
The combination of those two instruments will be an indirect indicatoin
at best. Using an O2 sensor is another data point and is a more direct,
but still indirect, measurement of afr. I also hope to capture air flow
rate, so am hoping to tie them all together and derive some formulae or
lookup tables to keep me informed of what is going on.
Still looking for answers about the dsired afr's for the various
conditions, though.
AI Nut
who HAS read the web pages Paul mentioned.
Here is a schematic from Ed that is not yet on the ACRE NL web page.
It takes data from Tracy's EFI/IGN computer and outputs
fuel flow.
Paul Lamar.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org