Kelly
Checked my pulse dampener and the screw was loose or just sitting there. It had
an o-ring on it. Used locktite and put it back.
Got the fuselage skinned and starting to assemble. Control hinge pins per the
plans is tight. Hope I will not have to redo to get the control travel limits.
Larry
Paul,
The post above is just a reminder for all on list who are the stock Mazda
fuel rail with a fuel pulse dampener to check under the plastic cap for a loose
screw and to apply loctite to same before retightening.
I received this post from one of the three "Dyke Delta" builders currently
installing 13B engines.
Kelly Troyer
Three rotary powered Dyke Delta's??? Wow!
It always amazes, encourages and gratifies me to hear of all the Mazda powered
airplanes out there being built. I look for another 50% increase (same as last year)
in the rotary powered airplane showing up this year both at Sun & Fun and OSH.
We will show those rotary engine pessimist :-) The rotary is the
future general aviation engine of choice. Long live the rotary!!!
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org