Tracy, does your controller function as a peak and hold current
controller;
that is, at the start of the pulse, more current is allowed to flow
(peaks)
to ensure that the injector is turned on, then limited to a lower
current,
just enough to hold on the injector - hence the term peak and hold.
Your instructions call for using a series resistor if one type of
injector
is used and not for the other. National Semiconductor used to make and
IC
that performed the peak and hold function for fuel injectors, don't know
if
it is still available but if so, it might save some power for those
interested in that.
Wendell
No. I use the same setup as Mazda, limiting resistor to limit current to
"hold" value. Don't know why Mazda used this setup but it is simple and
reliable.
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org