Bulent Aliev wrote:

I would like to use these gauges since they have a red bright LED warning
light in the center. Some of them come in two versions (ranges). Please
give
me your recommendations which ones are suitable for the rotary
applications.
I know the fuel pressure one is not adequate since goes only up to 15 psi
Bulent

Gaffrig makes good stuff.  I use their water pressure gauge.
I had a hard time finding one that would measure pressure higher
than 15psi.  I did an internet search and Gaffrig was the only
one I could find.  0-40 psi I think, sold by a marine company.

For fuel pressure I use an Autometer gauge with electric sender,
ordered through Summit Racing.

--
Perry Mick
Duckt N7XR
http://www.ductedfan.com

There is a model made by them that reads 10-90 psi
Bulent

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org