* > Keith Moore wrote:
For the water system conditions, you may find the new West Tack gage
of
interest .
The gauge displays the coolant system temperature and coolant pump
output
pressure (corrected for system pressure). In addition the gauge
incorporates warning lights to indicate low coolant condition
(yellow),
low
pump output pressure (red) and high system temperature (red).
The gauge is designed to fit in a standard 2.25" instrument mounting
hole. A
separate box containing the driving electronics is mounted in a
concealed
location behind the instrument panel.
In addition, electrical outputs are provided for each warning light
condition so as to allow an audible warning to also be provided
Check out http://www.liquidcooledairpower.com/cj-gauges.shtml for
more
details.
Keith (BlackHat) Moore
Long EZ in progress
BTW I checked the price for the gauge: $870 !!!
Bulent
Ha! Those guys are nuts!
BTW McMaster Carr has some great prices on analog gauges of all kinds.
High quality industrial type stuff. I got this cute little 2 3/4
vacuum gage that reads 0 to 30 inches of Mercury. Opposite to
a manifold absolute pressure gage. Subtract the number on the gage
from 30 and you have the manifold pressure in inches of Hg.
Was made by Marsh Instrument Company part number J4605.
You cannot beat the price at $14.95
There is now no excuse for all you guys flying rotaries to
not install one of these and tell me what the manifold pressure is
when you report RPM, speeds and EGT's :-)>
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org