<<<snip>>>
Also, how would I get my iPaq Pocket PC to run both Anywhere
Map and
log data from
my engine monitor at the same time?
Finn
Finn,
I built a little PIC circuit that lets me send rs232 data into the
Ipaq via
the infrared port (the IR port looks like any other rs232 port to the
software). I have not gone much farther than proving I can get a GPS and a
simulated EC2 stream into the IPAQ via the IR port when I went back to
working one more pressing issues like get this thing flying. Let me
know if
you want more details.
Perry Casson
We are into details around here Perry.
Paul Lamar
Yes, details, this is just the thing I've been wanting. Snap the iPAQ into
its holder and it will do GPS and DAQ (I think we've combined threads
here). I ran the Anywhere map all the way to Venezuela and back in the
RV-4 and loved it. Now if I can get the engine data recorded on the same
unit it would make performance development a snap. Throw in a couple of
channels for pitot & static pressure and we've got a full up performance
analysis unit that spits out a spread sheet.
Mike McGee, RV-4 N996RV, O320-E2G, Aurora, OR
13B in gestation mode
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org