If you are looking for a remote oil filter mount, you can try what I did- I took off the stock mount, tapped the inlet and outlet holes for NPT, then I made a plate to fit over the oil filter mount boss on the engine. This plate has holes to match the oil inlet and outlet, and the two holes where the studs from the boss go. I then tapped the oil inlet and outlet holes with the same npt threads. All I need now is the oil hoses and there you are. You can't get any cheaper than that.
Brian Trubee

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org