Subject: Herb Sanders LBF race
From: ACRE NL
Date: 1/15/2002, 11:54 PM


Bill Freeman wrote:

I sent it yesterday.

How does one calculate the drag of a
4 ft by 8 ft sheet of plywood moving at
50 mph at sea level and what is the
answer?

Bill

How thick is the plywood?

Let me define Equivalent Flat Plate Area
in very simple and easy to understand terms.

It is what you have left when you factor out V^2 * Rho/2 out of a drag value.


Paul Lamar

NO, it is not.   That is A*CsubD.     This implies that the CsubD of a
flat plate it 1.0, which it is NOT.   Call it anything ELSE you want to and
you'll be correct, and I will agree with you, but not "equivalent flat plate
area",because that name is taken and already has a precise meaning.

Bill

YES IT IS!!! :-)>
Some of your buddy's at NASA say it is and some say it isn't. These particular
guys at NASA say it is in this next statement. 

Quote:
"Although the CDp is the best value for comparing the drag efficiency of one airplane to
another the term Equivalent Flat Plate area (f.) is useful for comparing
the absolute parasite drag of two aircraft.  [It] is defined as:

f = CDp x S

End of quote.

A (your term) and S (everybody else's term for area) are the same thing.

I can see why you and some other people at NASA are confused.

In fact NASA is wrong in this statement below as induced drag due to lift
is not being taken into consideration here. You cannot strictly, and with
the utmost accuracy, compare two airplanes without taking induced drag due 
to lift into consideration.

Although the CDp is the best value for comparing the drag efficiency 
of one airplane to  another...

 
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org