Would the Compac IPAQ 3850 be a good choise to interface engine
and other
data into for a panel diplay?
IMHO a stock PC mother board and off the shelf plug in data
acquisition
ISA or PCI card is a much cheaper and much easier way of doing it.
Will it work with an Anywhere Map GPS unit?
Not at the same time.
Paul Lamar
Does sound like it could work at the same time if you feed the data
acquisition
via the IR port. We just need to know the required data format and
polarity.
Finn
I was thinking of taking the gauge readings (eng. temps and pressures) from
A-D converters and feeding this into a hand computer. Would like to find
bargains, new or used on E-bay or other source for the computers. Could
anyone tell me which unit is best and how hard would it be to have a program
made to do just the gauge instruments? Would use a separate computer for
GPS/moving map.
Wendell
Now you are talking. I don't think PDA's are programmed for multi-user.
One per job.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org