Subject: stratified charge - jetA
From: ACRE NL
Date: 1/20/2002, 10:16 PM


Paul, I have run a one rotor Mazda engine built by Lou Ross, on JetA. We call
it trailing injection . We put the injector in the trailing spark plug hole.
We would start it on a shot of propane or gasoline then switch on the fly. It
would run all night under load powering a 1kw gen. To start it up cold or hot
or just starting in general was another set of problems. Mainly money.
Conditioning the fuel is really a whole lot of it. There is a guy that lives
here that holds all the patents on Bosh diesel injector pumps. He has been
very successful in the aftermarket bolt on hp for diesel trucks. He has very
hi pressure pumps that could help this project. Another company back east
built a rotor for my one rotor engine that had a reshaped combustion chamber
and very hi compression ratio. That also worked good. A friend of mine that
I've helped on this project is now working for Moller doing a jetA  rotary. I
didn't know till I got down there that he had bought all of the OMC rotary
stuff. He has 1-4 rotor engines. The cost is up there because of production
numbers. Skip


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org