Would the Compac IPAQ 3850 be a good choise to interface engine
and other
data into for a panel diplay?
IMHO a stock PC mother board and off the shelf plug in data
acquisition
ISA or PCI card is a much cheaper and much easier way of doing it.
Will it work with an Anywhere Map GPS unit?
Not at the same time.
Paul Lamar
Does sound like it could work at the same time if you feed the data
acquisition
via the IR port. We just need to know the required data format and
polarity.
Finn
I was thinking of taking the gauge readings (eng. temps and pressures) from
A-D converters and feeding this into a hand computer. Would like to find
bargains, new or used on E-bay or other source for the computers. Could
anyone tell me which unit is best and how hard would it be to have a program
made to do just the gauge instruments? Would use a separate computer for
GPS/moving map.
Wendell
Now you are talking. I don't think PDA's are programmed for multi-user.
One per job.
Paul Lamar
Are you sure WinCE is not a multitasking operating system?
I thought I'd heard of someone playing mpeg files while running Anywhere Map?
Finn
No I am not sure. I am guessing. Why would something with such a limited
screen size be multitasking? Does not make a lot of sense. Of course
the latest $550 model is supposed to be able to run mpeg files. Is that the
one you have? Do you have the development system software Finn?
That should tell you the capabilities of the Compact PDA.
Anybody know what the software development package cost for Wince
and the compact PDA?
If you use a PC mother board for data acq you can write the stuff in compiled
QB BASIC and DOS which is more or less free at this point in time. Also
DOS is a lot better for real time stuff than any multi-user OS.
You can get a real time executive under lay for Linux from the U of New Mexico
I think. http://www.realtimelinux.org/
I looked into get the Compact PDA and the cost of all
the stuff you need puts it well over the cost of a PC mother board
for data acq.
As far as the moving map is concerned it would be cheaper to buy an old notebook
computer to run PC moving map software if you have the cockpit room.
If you don't mind running in black and white I will send you my
MM software for free :-) It is not fancy. It has been a few years since the data
base has been updated but I configured the FAA airport data base as
an ASCII text file and it can be read and updated with any text text editor.
In fact I will send you the QB source code. The moving map software
and FAA airport data base zipped will fit on one 1.4 meg floppy.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org