Subject: rs232 data into the Ipaq
From: ACRE NL
Date: 1/21/2002, 1:02 PM


Would the Compac IPAQ 3850 be a good choise to interface engine
and other
data into for a panel diplay?


IMHO a stock PC mother board and off the shelf plug in data
acquisition
ISA or PCI card is a much cheaper and much easier way of doing it.

Will it work with an Anywhere Map GPS unit?

Not at the same time.

Paul Lamar

Does sound like it could work at the same time if you feed the data
acquisition
via the IR port. We just need to know the required data format and
polarity.

Finn


I was thinking of taking the gauge readings (eng. temps and pressures)
from
A-D converters and feeding this into a hand computer.  Would like to find
bargains, new or used on E-bay or other source for the computers. Could
anyone tell me which unit is best and how hard would it be to have a
program
made to do just the gauge instruments? Would use a separate computer for
GPS/moving map.
Wendell

Now you are talking. I don't think PDA's are programmed for multi-user.
One per job.


If I'm not mistaken I think the serial port and IR port use the same com
port address.  I wrote a test application that used the serial port.  When I
ran the application in debug mode using the IR port I couldn't debug the
application as soon as the application activated the serial port.  I also
received a message that the ActiveSync could not connect to the Compaq (via
the IR port) because the serial port was in use.  When I killed the
application, the message went away.

I am planning to do the same thing that is proposed above except write my
own navigation Windows CE application and engine parameter monitoring
application.  The approach that I am planning to use is to use a
microprocessor (PIC or ???) to multiplex engine monitoring data and GPS data
onto the serial line connected to the Compaq.  I would use a 'thread' to
monitor the serial port and to separate out the GPS and monitoring data
sending it to the appropriate application.

I'm not sure what was meant by the statement that PDA's are not programmed
for multi-user.  The Windows CE is multitasking.  However there is only one
active window present on the screen.  Other applications such as the engine
monitoring application could be processing data in the background and could
become the active window when parameters are out of range (software
triggered) or when the user selects that application as the active window.

Del Johnson

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org