* > > > > > > > Would the Compac IPAQ 3850 be a good choise to interface
engine
and other
data into for a panel diplay?
IMHO a stock PC mother board and off the shelf plug in data
acquisition
ISA or PCI card is a much cheaper and much easier way of doing
it.
Will it work with an Anywhere Map GPS unit?
Not at the same time.
Paul Lamar
Does sound like it could work at the same time if you feed the
data
acquisition
via the IR port. We just need to know the required data format and
polarity.
Finn
I was thinking of taking the gauge readings (eng. temps and pressures)
from
A-D converters and feeding this into a hand computer. Would like to
find
bargains, new or used on E-bay or other source for the computers.
Could
anyone tell me which unit is best and how hard would it be to have a
program
made to do just the gauge instruments? Would use a separate computer
for
GPS/moving map.
Wendell
Now you are talking. I don't think PDA's are programmed for multi-user.
One per job.
Paul Lamar
Are you sure WinCE is not a multitasking operating system?
I thought I'd heard of someone playing mpeg files while running Anywhere
Map?
Finn
No I am not sure. I am guessing. Why would something with such a limited
screen size be multitasking? Does not make a lot of sense. Of course
the latest $550 model is supposed to be able to run mpeg files. Is that the
one you have? Do you have the development system software Finn?
That should tell you the capabilities of the Compact PDA.
Anybody know what the software development package cost for Wince
and the compact PDA?
If you use a PC mother board for data acq you can write the stuff in
compiled
QB BASIC and DOS which is more or less free at this point in time. Also
DOS is a lot better for real time stuff than any multi-user OS.
You can get a real time executive under lay for Linux from the U of New
Mexico
I think. http://www.realtimelinux.org/
I looked into get the Compact PDA and the cost of all
the stuff you need puts it well over the cost of a PC mother board
for data acq.
As far as the moving map is concerned it would be cheaper to buy an old
notebook
computer to run PC moving map software if you have the cockpit room.
If you don't mind running in black and white I will send you my
MM software for free :-) It is not fancy. It has been a few years since the
data
base has been updated but I configured the FAA airport data base as
an ASCII text file and it can be read and updated with any text text editor.
In fact I will send you the QB source code. The moving map software
and FAA airport data base zipped will fit on one 1.4 meg floppy.
Paul Lamar
*
* Paul, any of the 3000 series can run MPEG's, WMF's, and of course MP3's
and Wav's. The latest top 3800 model also has built in Bluetooth
send/receive capabilities....a much better method of data transfer I think
then IR. Have a place near bye in Fountain Valley that can up the internal
memory all the up to 256MB's. That will hold all sorts of Data! Also a SDK
has been released for PC2002 (the latest OS released last October.)
http://www.microsoft.com/mobile/developer/downloads/ppcsdk2002.asp
* You also need MS eMbedded Visual Basic 3.0
http://msdn.microsoft.com/vstudio/device/prodinfo.asp Both are free!
* Cheers!
* JET
You can't beat free. My problem with PDAs are they are proprietary
architecture and when they become obsolete (real soon now) they become
near worthless. They are too expensive to begin with approaching near $600.
Also if they break forget it. They are nearly impossible to repair or
too expensive to repair. The screens are too small so the info displayed
is limited.
They are also limited in expansion capabilities compared to a PC mother
board and storage capacities. For a real 3D moving topographical data base
you are going to need at least a CD ROM. This is the wave of the future
in moving map software. Greg is working hard on it. You also need to get
updates in in a simple manner and run two or more different moving map software
programs so you are not locked into one software vendor. This competition
tends to keep the software improving and the price competitive.
http://www.free-flt.com/
http://www.rmstek.com
http://www.ibiblio.org/fplan/Aviation-HOWTO/Aviation-HOWTO-8.html
http://www.avidaviator.com/moving_map_flight_planning.html
http://www.maptown.com/oziexplorer.html
I have some PCs around here that started life 15 years ago that have been
upgraded a number of times with new mother boards and larger hard
drives. Still cranking away.
Basically I think PDAs are bad investments for this purpose. I would
much rather spend a little time learning how to assemble my own PC
and be able to repair and upgrade it at low cost. The main drawback
of course is you need to plan your cockpit around a larger screen. If you
have a tandem airplane already this is not practical and a PDA may
a good solution.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org