If I'm not mistaken I think the serial port and IR port use the same com
port address. I wrote a test application that used the serial port. When I
ran the application in debug mode using the IR port I couldn't debug the
application as soon as the application activated the serial port. I also
received a message that the ActiveSync could not connect to the Compaq (via
the IR port) because the serial port was in use. When I killed the
application, the message went away.
I am planning to do the same thing that is proposed above except write my
own navigation Windows CE application and engine parameter monitoring
application. The approach that I am planning to use is to use a
microprocessor (PIC or ???) to multiplex engine monitoring data and GPS data
onto the serial line connected to the Compaq. I would use a 'thread' to
monitor the serial port and to separate out the GPS and monitoring data
sending it to the appropriate application.
I'm not sure what was meant by the statement that PDA's are not programmed
for multi-user. The Windows CE is multitasking. However there is only one
active window present on the screen. Other applications such as the engine
monitoring application could be processing data in the background and could
become the active window when parameters are out of range (software
triggered) or when the user selects that application as the active window.
Del Johnson
Now I can't find it, but someone posted something to the effect that the two ports
are independent.
I downloaded the MS Embedded Visual Basic SDK for free, but haven't looked at it.
Finn
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org