Mike & Marlene wrote:

Paul,

I sent this e-mail a few days ago but it would appear as if some of my
e-mails have gone astray so I hope you do not mind if I send it again.

I need some advice.

I used to live in Swaziland and have since moved to South Africa, a while
back I sent you a photograph of the motor that I bought here (your file ref:
Mike-Pienaar-Dsc06241.jpg).You identified it as a pre 89 model with the
turbo that is prone to cracking. I can now get the correct turbo (your file
ref Dave-Leonard-91EMAN_1.JPG) for $100, should I buy it and will it fit on
my motor?

It will fit.
Yes you sure should. That is a bargain if it is OK. I paid $250 US in Sydney
and I thought that was a steal. They go for up to $1000 here in the U.S.
Are you getting the manifold with it? Are there any more down there? PL

I will be emigrating to Toronto in Canada later in the year and will
appreciate it if any Canadians on the list can give me some advice on
whether I should take my current motor (that is in pieces) to Canada or
whether second hand motors are readily available there and at what cost. I
can get a second hand motor here for US $600

If the Canadians could also contact me off the list it would be nice as I
also have some questions regarding my half built KIS Cruiser that I want to
take along. My e-mail address is: marlene_p@freemail.absa.co.za

I'm sorry my questions are not as esoteric as those on flat plate drag but
sometimes we have to attend to practicalities!

Many Thanks

Mike Pienaar
Mike & Marlene
Tel:      +27 11 678-9039
Mobile: +27 82 668-9768

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org