Subject: Planetary redrives parts
From: ACRE NL
Date: 1/23/2002, 6:36 AM


Stopped by the auto transmission parts store today
and priced a Ford six pinion planet carrier with
pinions.  $75!! Can't beat the prices to overhaul your own gear box.
Will bolt right in to Tracy's Redrive. The Ross may take a
bit of rework. Same price for the 2.17:1 or the 2.85:1 set.
Tracy rates this Jewel at 300 HP in his box.

I am working on getting info on the Allison planetary which
should be good to about 600 HP.

Cal Tex Auto Transmission parts.  1 800 422 5890
Van Nuys CA
Ask for Noea. (Noah)

Paul Lamar


MORE QUESTIONS

1)I know that only one of the turbos on the b13 are good for a aircraft
installation, how do I identify which is the right one?

I don't think either one would be good for aircraft use.
I would put a TO4 on it. I think there is an after market
HKS turbo manifold that adapts the Garrett TO4 turbo
to the 13B. The 89 to 92 13B had a single turbo and that
is the unit I am going to try.

2)Once I have purchaced one off these planetarty drives, what  needs to be
made to complete the PSRU?

Are you speaking of buying just the gear set or a complete PSRU?
If complete PSRU Tracy Crook sells a good one for about $2500 to $3000.
If you make your own you will need input and output shafts as
well as a housing. Not an easy thing to make unless you have a machine
shop.

3)Can the rotary engine run on any one of the two spark plugs it has per
rotor if the other fails?

Yes. I am not sure how well it will run on just the trailing plug
but it probably runs so well on just the leading plug you may 
not even notice.

4)Are their any high time chain reduction units you know off?

There is at least one being tried. I don't think there is any time
on it yet however.

Thanks.
Patrick

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org