Of course the easier and more accurate way is to just hook up the pump

to the attitude gyro and see if it works :-)<

OK, now that sounds much more practical. I can do that! And I'll tee in
my Sears vac gauge as well.....more later. Don't ask me to measure amp
draw!
Marc Wiese

Why not Marc? It is easy. One wire out of the multi meter goes to the device
and the other (usually the red one) goes to the battery.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org