Subject: fat=lower drag, was The miraculous Subaru???
From: ACRE NL
Date: 1/26/2002, 9:13 AM


Although the resulting look is somewhat "pregnant" and
not really as
"cool"
as the pointed nose, it is a far superior aerodynamic
shape (according to
all the books I have anyway). The real problem with
trying to make a nice
laminar flow shape with a canard is the canard. It tends
to ruin the
laminar
flow. So I'm not sure how much of a gain you could get.

Monty

I did something similar with my Cozy MK-IV fuselage.
Bulent

Looking good, Bulent! Keep on plugging, you'll get there.
Great renderings, Monty,looks really slick to me.


If only there were a macine you could feed a rendering into, and get a
finished airplane :P
John Slade

There almost is. Here in Santa Paula a guy by the name of John Lynch
built a large 3D PC computer controlled router. He just finished the
NemesisNxt fuselage buck used to make the female molds.
You put in a rendering in Solid Works and get out this huge
foam fuselage. All it takes is a lot of money.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org