Although the resulting look is somewhat "pregnant" and
not really as
"cool"
as the pointed nose, it is a far superior aerodynamic
shape (according to
all the books I have anyway). The real problem with
trying to make a nice
laminar flow shape with a canard is the canard. It tends
to ruin the
laminar
flow. So I'm not sure how much of a gain you could get.
Monty
I did something similar with my Cozy MK-IV fuselage.
Bulent
Looking good, Bulent! Keep on plugging, you'll get there.
Great renderings, Monty,looks really slick to me.
If only there were a macine you could feed a rendering into, and get a
finished airplane :P
John Slade
There almost is. Here in Santa Paula a guy by the name of John Lynch
built a large 3D PC computer controlled router. He just finished the
NemesisNxt fuselage buck used to make the female molds.
You put in a rendering in Solid Works and get out this huge
foam fuselage. All it takes is a lot of money.
Paul Lamar
Actually not that much money anymore Paul. I have been considering doing
just that when I get my new workshop built. A large gantry router is not
that hard to build. If you use concrete support columns and use square steel
tubing, acme lead screws with brass double nuts, etc. use a laser level to
align things. The materials are not all that expensive. There are some good
inexpensive stepper control systems out there that use a PC. In addition you
could use a rotary table with a stepper on it and make a 4 axis machine that
mounts the fuse on a large "spit" You can then get really nice contouring.
You could assemble the inner structure of the aircraft. Put the foam on the
outside. stick the thing in the router and let it cut the fuselage. It would
probably be accurate within 1/16" or less. Then do your outer lay-ups right
on the spit! You could also make all the cutouts for any windows, and make
the molds for the windows. Figure less than $5K to build the whole thing
(excluding building to house it).
Anyway, add that to the ever growing list of things to do. I'm going to have
to sign off of the newsletter for a while until I get moved into my new
place. I'm temporarily moving into a cabin down the road from my new house,
and my nice digital "fire hose" will be back down to straw size until I get
my satellite system hooked up. Ken Powell has agreed to keep me posted on
any happenings by phone so I won't miss any get togethers or other cool
events. Keep up the good work. As soon as I can get situated I'm going to do
some heat exchanger experiments. Anyway, after Sunday night take me off the
list :-(.
Monty
OK Monty
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org