Subject: fat=lower drag, was The miraculous Subaru???
From: ACRE NL
Date: 1/26/2002, 7:43 PM


It is possible to have a lower drag number for a shape with more frontal
area if the shape is more aerodynamic, like you said, a blimp is the best
shape for subsonic, ie Questair Venture. If one paid close attention to how
the fuse was shaped on a cozy, rather than just a wider slab sided EZ I bet
you could get a reduction in drag over the EZ. The resulting shape is
harder
to construct, however.

Although the resulting look is somewhat "pregnant" and not really as "cool"
as the pointed nose, it is a far superior aerodynamic shape (according to
all the books I have anyway). The real problem with trying to make a nice
laminar flow shape with a canard is the canard. It tends to ruin the
laminar
flow. So I'm not sure how much of a gain you could get.

Monty

Don't forget about the all metal Piaggio P 180 Avanti.  Although it is not a
true canard (elevator in the T-tail), the ad guys report jet performance at
turbo prop prices.  If you ever get to see one up close, stand at the nose and
admire the smooth shape as it widens then narrows toward the rear.  There is
no cylindrical shape to the body.  I would love to see a 4-6 seat kit version.

Scott Moore
N-316RJ (reserved)
juno@dog.com


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Piaggio_Avanti_180.jpg

p180_3.gif