The 1989-92 stock Mazda cast iron turbo manifold does not crack in automotive
service, it will fit the gen 3 and it is not that heavy as I recall
because it is small. See the picture below.
Ok, just repeating the stuff off the Mazdatrix site about cracking manifolds. So, the '91 manifold you show looks pretty small. Are there any issues with the smaller '91 type manifold being too close > in, say we were using the oil pan mount ala John Slade, is it going to impinge on the mounting
area?
Mazdatrix excessively generalized.
Well the intake manifold is a real tight fit and that is is why Tom is working
on a casting pattern as we speak. If you can hold off for awhile on the intake
manifold I think Tom can help you out.
If no, does anyone happen to have one laying around? :)
Good luck on that. They are in high demand. I can give you the name of an
outfit in Sydney that may still have some. They will ship.
Try http://www.japperformace.com I bought mine there.
We will let Greg be the one to blaze new trails with turbo boost, while with our limited understanding of the subject we agree with what he says, we do not understand enough to say whether the engine will agree for long. (blonde logic)
...Chrissi
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org