Subject: turbo exaust manifolds
From: ACRE NL
Date: 1/27/2002, 6:31 PM


The 1989-92 stock Mazda cast iron turbo
manifold does not crack in automotive
 service, it will fit the gen 3 and it is not
that heavy as I recall
 because it is small. See the picture below.


Ok, just repeating the stuff off the Mazdatrix
site about cracking manifolds. So, the '91 manifold
you show looks pretty small. Are there any issues
with the smaller '91 type manifold being too close >
in, say we were using the oil pan mount ala John
Slade, is it going to impinge on the mounting
 area?

Mazdatrix excessively generalized.

Well the intake manifold is a real tight fit and
that is is why Tom is working
on a casting pattern as we speak. If you can hold
off for awhile on the intake
manifold I think Tom can help you out.

 If no, does anyone happen to have one laying
around? :)

Good luck on that. They are in high demand. I can
give you the name of an
outfit in Sydney that may still have some. They
will ship.
Try http://www.japperformace.com I bought mine
there.


 We will let Greg be the one to blaze new trails
with turbo boost, while with our limited
understanding of the subject we agree with what he
says, we do not understand enough to say whether the
engine will agree for long. (blonde logic)
 ...Chrissi


Make that:

http://www.japperformance.com/

Paul Lamar


 try www.revolutionrotary.com  my  91 engine had a
cracked manifold and i bought one from them which was
exactly as they described, no problems.  around $75
jim coffman

First cracked 91 I have heard of Jim. I assume your turbo was OK?

Paul Lamar 
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org