"Byrd, Ray" wrote:
Lower drag with more frontal area? YES! With a family of very clean
shapes, drag continues to reduce as max thickness moves aft. (NACA
laminar-flow airfoils are a notable example)
For the ultimate in fuselage drag reduction see AIAA-87-2935, Fabio
Goldschmied, "Fuselage Self-Propulsion by Static-Pressure Thrust: Wind
Tunnel Verification". Boundary layer is ingested near the aft end, and blown
aft thru a nozzle. Drag coefficient can be zero, and propulsive efficiency
100%. A real mind bender.
Ray Byrd
Since a canard develops lift there will be two vortices trailing aft at
the juncture of the canard and the fuselage. Kind of destroys most of the
benefit of a lower fuselage length to frontal area ratio.
The other factor is sort of an area rule effect that modifies the
cusp of a true laminar flow object with a aft located max frontal
area and that is the location of the strakes. Extensive wind tunnel
test should be done to explore these factors before any judgments
can be made that a larger frontal area fuselage such as the Cozy
or Velocity is lower drag than a tandem seat fuselage with half the
frontal area such as a Long EZ. Frankly I doubt it.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org