Subject: fat=lower drag, was The miraculous Subaru???
From: ACRE NL
Date: 1/28/2002, 2:06 PM

"Byrd, Ray" wrote:

I agree. Any large-scale modification can have a myriad of effects...many
can be expected to have negative impact on the  performance goals.

I'm not familiar with the concept of vortices at the juncture of a canard
and its fuselage.  Tips...yes.  Please continue.

Perhaps vortices is not quite the right word.
It is usually defined as interference drag when a wing intersects a fuselage.
It could be defined as mere turbulence. The axis of the vortices is perpendicular
the to fuselage as in curlicues :-)> High pressure on the bottom and low
pressure on top. A lot depends on the gap between "elevator" and fuselage
and "elevator" trim deflection. If the gap is large enough it will be a 
true longitudinal axis vortex for sure. PL

I haven't done comparative drag numbers on Cozy/Velocity vs EZs.  Should be
revealing. Has anyone done that?

I too would like to see that well documented. Perhaps in a side by side
race. PL

Sometimes happy gremlins pop up. I remember the recorded surprise at
Lockheed when the F-80 was stretched to a dual trainer as the T-33...and
it's cruise-power speed was found to be noticeably faster than the 80.

Ray Byrd

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org