The 1989-92 stock Mazda cast iron turbo manifold does not crack in
automotive
service, it will fit the gen 3 and it is not that heavy as I recall
because it is small. See the picture below.
Paul, the stock manifold WILL crack. Mine was cracked in the center web
(between each exhaust passage) all the way through, and there were
several
severe cracks around the periphery of the turbo side. 1990 T2 car with
166K
miles upon disassembly. I think I still have the old mani; if I do I
will
try to get some pics. I might have some pics from when I magnafluxed it.
Mike Harrington
Well apparently I am mis-informed. Is your turbo cracked too Mike?
Not clear from your post.
Yes, exhaust housing was cracked inside. Wheels were OK though.
What did you replace it with?
New OE manifold, coated with jethot 2000. Hybrid T3/T4 turbo from
Turbonetics (reman).
Did you own the car from new?
No.
Did you jack up the boost?
No. Car was making 4PSI when I got it, after replacing precat about 10PSI
(stock for the 89-91 T2s).
Mike Harrington
Thanks Mike I was just trying to nail down a possible operational reason
for turbo cracking. A couple more questions if you don't mind.
How many miles on the car when you bought it?
I assume OE means Original Equipment correct?
What did the OE manifold cost?
What are the claims for Jethot 2000? Is it claimed to reduce
cracking?
Do you have any data that might explain turbo and manifold cracking
as a function of back pressure or possibly a plugged precat?
Is the replaced precat gutted. Send me private email if you want
on this last question :-)>
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org